KASON-HPT Series Plastic Pipe Hydrostatic Pressure and Burst Tester

Test standard

ASTM D1598-2004, ASTM D1599 and IS0 1167-2006.

Pressure range

10,16,25Mpa

Resolution of pressure testing

0.01Mpa

Accuracy

Better than ±1%

KASON-HPT Series is mainly used to determine the resistance of thermoplastics pipes and short-time hydraulic burst to constant internal water pressure at constant temperature.It is applicable to thermoplastic pipes intended for the conveyance of fluids.

Request a Quote Download

Home >> Products >> Rubber and plastic material test equipment >> Hydrostatic Pressure Tester

KASON-HPT Series Plastic Pipe Hydrostatic Pressure and Burst Tester

Request a Quote

Product Details

Working principle

Input the parameters such as ring stress, wall thickness and average outer diameter of the pipe on the PC, and automatically calculate the test pressure. The data is transmitted to the lower computer (MCU embedded system) through the RS232 serial port, and the lower computer automatically conducts constant pressure on the pipe. High pressure pump A high-pressure liquid pressure source is generated, and through the pressure control system, the high-pressure hose is transported to the sample in the medium incubator, and the long-term hydrostatic test or blasting test of the pipe is carried out. The test results of this equipment can fully reflect the level of product quality of the enterprise.

Product parameters

Model	KASON HPT-10	KASON HPT-16	KASON HPT-25
Pressure range	10Mpa	16Mpa	25Mpa
Resolution of pressure testing	0.001MPa	0.001MPa	0.001MPa
Accuracy	Better than ±1%	Better than ±1%	Better than ±1%
Testing pipe	φ20mm-φ630mm	φ20mm-φ630mm	φ20mm-φ630mm
Test station	3 stations or even more	3 stations or even more	3 stations or even more
Constant temp. range	room temperature~95℃	room temperature~95℃	room temperature~95℃
Temp. Accuracy	±0.1℃	±0.1℃	±0.1℃
Time accuracy	≤±0.1%	≤±0.1%	≤±0.1%
Power supply	3 phase, 380v±10%, 50Hz	3 phase, 380v±10%, 50Hz	3 phase, 380v±10%, 50Hz