KASON HPT-10M-3 Plastic Pipe Hydrostatic Pressure Tester_Jinan Kason Testing Equipment Co., Ltd.

KASON HPT-10M-3 Plastic Pipe Hydrostatic Pressure Tester

Control System

Two-Level Monitoring

Testing Standard

GB/T6111-2018,GB/T15560-1995,GB/T18252-2008,ASTM D1598-2004

Maximum Test Pressure

10Mpa

Number of Test Paths

3-channel

The KASON HPT-10M-3 hydrostatic burst tester is suitable for testing the instantaneous hydraulic burst of various plastic pipes used for fluid transportation and the failure resistance of thermoplastic pipes under long-term constant pressure. It is an essential testing instrument for research institutes, quality inspection departments, and pipe manufacturers.

Request a Quote Download

Home >> Products >> Rubber and plastic material test equipment >> Hydrostatic Pressure Tester

KASON HPT-10M-3 Plastic Pipe Hydrostatic Pressure Tester

Request a Quote

Product Details

Working Principle

This instrument can perform both hydrostatic and burst tests. Parameters such as the pipe's hoop stress, wall thickness, and average outer diameter are entered into a PC to automatically calculate the test pressure. Alternatively, the test pressure can be manually entered based on actual experience. The computer transmits this information to a slave computer (MCU) via the RS232 serial bus. The slave computer automatically maintains a constant pressure on the pipe. A high-pressure plunger pump generates a high-pressure liquid pressure source. This pressure is then delivered through a pressure control system via a high-pressure hose to the specimen in a constant temperature chamber, allowing for long-term hydrostatic or burst tests on the pipe.

Product parameters

KASON HPT-10M-3 Plastic Pipe Hydrostatic Pressure Tester(Dual circuit)
Tester Accuracy Level		0.5 level
Maximum Test Pressure		10MPa
Number of Test Paths		3-channel
Control Method		Industrial touch screen computer control
Data Storage		Each channel has power-off data protection and can be restored upon restart
Time	Timing time	0 to 9999 hours and 59 minutes
	Timing accuracy	±0.1%
	Time resolution	1 second
	Minimum setting unit	min
Pressure	Pressure control range	0.2 to 10 MPa
	Pressure display unit	MPa, bar, or PSI
	Pressure control accuracy	-1% to +2%
	Full-load constant pressure control accuracy	Within ±0.3%
	Pressure display resolution	0.001 MPa, 0.01 bar, or 1 PSI
	Measurement range	0-100% FS
	Indication error limit	Within ±1% of displayed value
Range	Sample tube diameter	Ø16mm-Ø400mm