Introductions

METPRESS-PVM1000 fully automatic pressure cold mounting machine uses PLC control, a high-intensity pressure cooker and a built-in air pump to complete the entire mounting process of multiple pressurization, pressure maintenance, and deflation with one click. It is a special mounting machine designed for the special requirements of cold mounting. equipment. Using this equipment, the bubbles and pores in the mounted sample can be significantly reduced without changing the physical and chemical properties of the resin, providing the best results for subsequent sample grinding and polishing and microstructure analysis.

Features:

1. Quickly reach the working pressure 0.2Mpa (2 atmospheres).

2. Complete the entire inlay process including multiple pressurization, pressure maintenance, and deflation cycles with one click;

3. Pressure digital display and automatic control. After reaching the set pressure value, the automatic air pump automatically stops. After the pressure drops by a certain value, the air pump automatically starts.

4. Process parameters such as air pressure, pressure maintenance time, deflation, number of cycles, and inlay completion reminder can all be set;

5.999 sets of process parameters, set according to different materials and samples, password protected and easy to call;

6.Multiple pressure protection, the product is safer:

When there is pressure in the pot, the lid is automatically locked, that is, the lid cannot be opened during operation;

When the pressure exceeds 10% of the working pressure, the pressure relief valve on the top of the container automatically releases the pressure immediately.

7. The pressure vessel is made of stainless steel and has a large inner cavity capacity, which can handle more than 20 samples with a diameter of 30mm at the same time.

8. Built-in air pump, low noise, oil-free, pollution-free and maintenance-free.

9. The special deflation valve can implement multiple cycles of pressurization and deflation inlay processes.