Optical Fiber Cable Temperature Cycling Chamber_Jinan Kason Testing Equipment Co., Ltd.

Optical Fiber Cable Temperature Cycling Chamber

Internal volume

8M3

Temperature range

-40℃~＋150℃

Temperature fluctuation

≤0.5℃

The Optical Fiber Cable Temperature Cycling Chamber is designed to apply temperature cyclingon optical fiber cables in order to determine the stability behavior of the attenuation of cablessubmitted to temperature changes. It features large test chamber, precise temperature controlas well as low temperature fluctuations.

Request a Quote Download

Home >> Products >> Optical cable testing machine

Optical Fiber Cable Temperature Cycling Chamber

Request a Quote

Product Details

Overview

The Optical Fiber Cable Temperature Cycling Chamber is designed to apply temperature cycling

on optical fiber cables in order to determine the stability behavior of the attenuation of cables

submitted to temperature changes. It features large test chamber, precise temperature control

as well as low temperature fluctuations.

This test chamber is suitable for high temperature, low temperature, high and low temperature cycle and

temperature screening (ESS) tests on products (complete machine), parts and materials.

Test standard

1. GB/T 2423.1 Test A: Low temperature test method

2. GB/T 2423.2 Test B: High temperature test method

3. GB/T 2423.3 test Ca: constant damp heat test

4. GB/T 2423.4 Test Db: Alternating damp heat test

5. GJB 150.3 high temperature test

6. GJB 150.4 low temperature test

7. GJB 150.9 damp heat test (Figure 1, Figure 2)

Product parameters

Model	KASON-GTC-40150
Internal volume	8M3
Studio size	2000×2000×2000mm(width×depth×height WDH)
Dimensions	Approx. 2210 ×3675 ×2400mm (width×depth× height WDH, height excluding motor cover, height 280)
Power supply	380V± 10%, 50Hz±1three-phase four-wire +grounding wire, protective grounding resistance less than 4Ω
Temperature range	-40℃ ~ ＋ 150℃
Temperature fluctuation	≤0.5℃
Temperature uniformity	≤2℃
Temperature deviation	±2℃
Heating rate	≥2℃/min average (no load)
Cooling rate	≥1℃/min average (no load)
Noise	≤75dB