KASON-2000GGW 2000KN Rail Static Bend Testing Machine
- Capacity
2000KN
- Machine Stoke:300mm
300mm
- Machine Testing speeds
0.7～1.2mm/s
- Rail size
60E1~46E2
Servo-hydraulic Rail Static Bend Testing Machine is designed for testing of rails after welding, analysis is performed at the edge of the weld collar of an aluminothermic weld, in order to examine one of the failure modes that occur in this weld type under high axle load conditions.
KASON-2000GGW 2000KN Rail Static Bend Testing Machine
KASON-2000GGW 2000KN Rail Static Bend Testing Machine
Servo-hydraulic Rail Static Bend Testing Machine is designed for testing of rails after welding, analysis is performed at the edge of the weld collar of an aluminothermic weld, in order to examine one of the failure modes that occur in this weld type under high axle load conditions.
Request a QuoteProduct Details
l The machines controls allow for full pc control and data acquisition of results of load and extension.
l Rigid 4-column load frame providing superior axial and lateral stiffness and minimum maintenance, low reaction at specimen failure.
l Load frame with weight up to seven tones and load capacity up to 2000kN.
l Top mounted actuator with unchanged height of lower platform making it is easy for operators to install specimens and test fixtures.
l Fully covered rail testing chamber ensure the safety for operators
Sliding roller bench facilitate operator to install the specimen into testing chamber
Product parameters
|
Capacity |
kN |
2000 |
|
Load resolution |
kN |
Capacity/300, 000 (fully auto scaling of single measurement range) |
|
Machine specifications |
Stroke |
|
|
in |
11.81 |
|
|
mm |
300mm |
|
|
Testing speeds |
||
|
in/s |
0.0276~0.0472 |
|
|
mm/s |
0.7～1.2 |
|
|
Loading rate |
||
|
kN/S |
40~120 |
|
|
Bend test arrangement |
Bearer span |
|
|
in |
39.37±0.197 |
|
|
mm |
1000±5 |
|
|
Bearer radius |
||
|
in |
0.984~2.756 |
|
|
mm |
25~70 |
|
|
Hardness of bending tip |
HRC |
50-55 |
|
Surface roughness of bending tip |
µm |
Ra≤6.3 |
|
Rail size |
|
60E1~46E2 |
|
Machine dimensions |
Load frame |
|
|
in |
62.3*39.4*98.4 |
|
|
m |
1.6*1.0*2.5 |
|
|
Control console |
||
|
in |
45.3*31*35.4 |
|
|
mm |
1150*780*900 |
|
|
Weight |
lbs |
15, 432.00 |
|
kg |
7, 000.00 |
|
Download
| Name | Download |
|---|
Applicable industries
Related Products
-
Telephone:+86 15910081986
Address：NO.4715, JINGSHI WEST ROAD, HUAIYIN DISTRICT, JINAN, SHANDONG, CHINA
Mailbox：admin@jnkason.com
-
Testing machine equipment metallographic analysis hardness tester series
Non-destructive testing equipment Material analysis instruments
©2026 Jinan Kason Testing Equipment Co., Ltd.