HNR-400A MFR Melt Flow Index Tester_Jinan Kason Testing Equipment Co., Ltd.

HNR-400A MFR Melt Flow Index Tester

Measuring Range

0.1-400.00g/10min (MFR)

Precision Of Temperature Control

Room Temperature - 450°c

Precision Of Temperature

±0.2°c

Precision Of Time

1s or 0.01s

This machine is not only suitable for engineering plastics such as polyethylene, polyarylsulfone, fluoroplastics, nylon, etc.

Request a Quote Download

Home >> Products >> Rubber and plastic material test equipment >> Melt Flow Index Testers

HNR-400A MFR Melt Flow Index Tester

This machine is not only suitable for engineering plastics such as polyethylene, polyarylsulfone, fluoroplastics, nylon, etc.

Request a Quote

Product Details

Application:

This machine is not only suitable for engineering plastics such as polyethylene, polyarylsulfone, fluoroplastics, nylon, etc., with higher melting temperature, but also suitable for plastics with lower melting temperature such as polyethylene, polystyrene, polypropylene, ABS resin, and polyoxymethylene resin. test. Especially suitable for universities, research institutes, quality inspection institutions, plastic manufacturers, plastic products and petrochemical industries.

Standard

GB/T3682-2000 "Determination of Thermoplastic Melt Flow Rate and Melt Volume Flow Rate"

ISO 1133: 1997 "Determination of Thermoplastic Melt Mass Flow Rate MFR

ASTM D1238 "Standard Test Method for Measuring Thermoplastic Melt Flow Rate by Extrusion Plastometer"

Product parameters

Model	XNR-400A
Measuring Range	0.1-400.00g/10min (MFR)
Precision Of Temperature Control	Room Temperature - 450°c
Precision Of Temperature	±0.2°c
Precision Of Time	1s or 0.01s
Time Setting	1~9999s or 0.01-99.99s
Load	Full Load
Cutting Mode	Manual, By Time
Screw Barrel Internal Diameter(mm)	9.550 ± 0.025
Screw Barrel Length(mm)	160
Cavity Die(mm)	Tungsten Carbide, L 8.000±0.025,
Cavity Die(mm)	Internal Diameter 2.095 ±0.005
Power(kW)	0.45
Power Supply	AC220V, 50Hz
Dimension(mm)	40050060
Net Weight(kG)	60