KASON-CT100 Groove Tester_Jinan Kason Testing Equipment Co., Ltd.

KASON-CT100 Groove Tester

Operating speed

4.5 r/min

Upper tooth radius

1.50±0.1 mm

Lower tooth radius

2.00±0.1 mm

Tooth depth

4.75±0.05 mm

This instrument is suitable for testing the corrugated core paper by pressing a standard corrugated waveform (i.e., laboratory corrugation of the corrugated core paper).

Request a Quote Download

Home >> Products >> Paper and packaging material testing instruments

KASON-CT100 Groove Tester

This instrument is suitable for testing the corrugated core paper by pressing a standard corrugated waveform (i.e., laboratory corrugation of the corrugated core paper).

Request a Quote

Product Details

Product Introduction

This instrument is suitable for testing the corrugated core paper by pressing a standard corrugated waveform (i.e., laboratory corrugation of the corrugated core paper). After corrugation, it can be used with a computer compression tester to measure the CMT and CCT of the corrugated core paper, conforming to standards such as QB1061, GB/T2679.6, and ISO7263. It is an ideal testing equipment for paper mills, research institutions, and quality inspection agencies.

Product Features:

The instrument adopts single-chip microcomputer control technology, high-precision temperature controller for accurate temperature adjustment, PID control mode with automatic temperature compensation, fast response speed, high steady-state accuracy, digital display of actual temperature and set temperature, with over-temperature protection device, automatic memory of set parameters after power failure, parameter self-tuning function, precision gear transmission mechanism, sensitive and durable standard buttons, and automated corrugated paper corrugating method.

Product parameters

Parameter	Specification
Operating speed	4.5 r/min
Upper tooth radius	1.50±0.1 mm
Lower tooth radius	2.00±0.1 mm
Tooth depth	4.75±0.05 mm
Gear tooth type	Type A
Temperature resolution	1℃
Adjustable operating temperature range	0~200℃
Standard heating temperature	(175±8)℃
Adjustable working pressure range	(49~108)N
Spring tension	100N
Dimensions (L×W×H)	Approx. 564mm×377mm×330mm
Power supply	AC220V, 50Hz